FAQ: How To Fix Directv 747 Error Code?

DIRECTV Error Code 747 Error Code Solution = On Screen Display says Unable to complete this transaction. Have Customer Service resend authorizations, then reset IRD Only on NDS IRDs such as D10s, H20s, R15s.

How do I fix Error 775 on directv?

Check receiver connections

  1. Check and secure all connections on the back of your receiver. Start with the SAT-IN connection.
  2. See if you have a SWiM Power Inserter attached to the DIRECTV cable coming from your dish (it may be in a different room).
  3. Wait 15 seconds, then plug it back in.

How do I fix my directv 711 code?

Refresh/reset your receiver

  1. Unplug your receiver’s power cord from the electrical outlet.
  2. Wait for 15 seconds then plug it back in.
  3. Press the Power button on the front panel of your receiver and let it reboot.
  4. Refresh your service again, if necessary.

What does code 13 mean on directv?

13 Problem reading the access card Contact Customer Service. 14 On Screen Text: “Internal Storage Error Detected. A problem was detected reading your internal storage device. Please call Customer Service at 1-800-DIRECTV and report the diagnostic code displayed below.

You might be interested:  Quick Answer: Error Code 50 When Installing Creative Cloud?

What causes a 775 error on DirecTV?

DirecTV error 775 usually occurs while watching any channels on the television screen. This error code reflects that your DirecTV receiver fails to communicate with the satellite dish. In addition, if the power inserter is turned off to frayed or severed cable, it can trigger the DirecTV 775 error.

How do you reset a DirecTV satellite dish?

Press the reset button

  1. Locate the reset button. On most DIRECTV receivers, there is a small red button located inside the access card door. With others, the button is on the side of the receiver.
  2. Press the red button, then wait for your receiver to reboot.

Why do I keep losing my satellite signal?

Signal Loss Error Message This issue is usually a result of the satellite dish being in a slightly wrong position, damaged or malfunctioning equipment, severe weather, or something blocking the dish’s view of the sky.

How do I fix my satellite signal?

Check all the cables between your TV equipment and satellite dish are connected securely. Try disconnecting and reconnecting the cables as this often works. While doing so, check none are damaged or wet. Unplug your receiver from the mains and leave for 10 minutes.

How do I fix DIRECTV error code 612?

The 612 code usually appears when a Genie Mini receiver is having trouble connecting to the main Genie. There are some steps we can try to help with that. Reset your Mini using the red reset button on the right-hand side of it. Afterward, reset your main Genie receiver the same way.

You might be interested:  FAQ: How To Fix Error Code 0xc000000d?

How do I fix DIRECTV error 781?

DIRECTV Error Code 781 Error Code Solution = IRD needs to call to download PPV information. Once it is downloaded the limit will be once again available. Follow procedure for 731 Access Card Full Limits are to protect the customer as well as assure DIRECTV is able to collect on purchase.

What is this DIRECTV Code 782?

You’ll see DIRECTV error code 782 when the signal between your receiver and satellite dish is interrupted.

What does code 612 mean on DirecTV?

The 612 code usually appears when a Genie Mini receiver is having trouble connecting to the main Genie. There are some steps we can try to help with that. Reset your Mini using the red reset button on the right-hand side of it. Afterward, reset your main Genie receiver the same way.

Why does my DirecTV Remote not work?

Receiver and remote control reset If the buttons on your remote are not responding, try resetting the receiver and remote control. On most DIRECTV receivers, there is a red button on the side of the receiver or inside the access card door. Press and hold the red button until the receiver restarts.

Why does my DirecTV not work?

Reset your receiver Press the red reset button which is located on the side of most DIRECTV receivers or inside the access card door on the front panel. Wait for your receiver to reboot. If your receiver doesn’t have a red reset button: Unplug the receiver’s power cord from the electrical outlet.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top