FAQ: Le Washing Machine:How To Fix The Oe Error Code?

OE can be triggered by a kinked drain hose or a clogged drain pump filter.

  1. Check for kinked drain hose. Check behind the washer to ensure that the drain hose is not kinked or clogged.
  2. Test the drain pump.
  3. Do you hear the humming sound?
  4. Clean drain pump filter.
  5. Run tub clean cycle.
  6. Request Repair.

How do I fix the OE code on my LG top load washer?

OE Error Code – Top Load Washer

  1. Press POWER to turn the washer on.
  2. Press the SPECIAL USE key until SPIN ONLY is lit.
  3. Press the START/PAUSE button to begin the cycle.
  4. The unit should begin a SPIN ONLY cycle and attempt to drain any remaining water that is inside the washer.

How do you reset Le error on LG washer?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.
You might be interested:  Question: How To Reset A 6962 Hp Printer Error Code 0x6100004a?

How do I clear the OE code on my LG dishwasher?

OE Error Code – Dishwasher

  1. Check for food debris. If you notice any food debris in the tub of your dishwasher, remove larger food debris and items that may not wash out.
  2. Clean the filter.
  3. Check the drain hose.
  4. Check the air gap.
  5. New dishwasher or gabage disposal.
  6. Force the Drain.
  7. Request a Repair.
  8. Important Tip.

How do I force drain my LG washer?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

What do you do when your LG washer won’t drain?

Clean the pump filter and filter opening with a soft-bristled brush and warm water. Place the cap back into the drain hose and reattach the hose to the washer. Insert the drain pump filter back into the washing machine, making sure it is inserted securely. Close the drain pump filter cover.

Is there a reset button on my LG washer?

If your LG washing machine won’t start, try doing a hard reset on the unit. To perform a reset, start by unplugging your washer. Then, press and hold the power button for 5 seconds. Do the same with the play button.

What does error code ie mean on LG washer?

An IE error code indicates that the washer was unable to fill with water. During cold and freezing weather conditions, an IE error code could mean the water in the water supply lines are frozen.

You might be interested:  Quick Answer: Error Code 14 For Airtel Means What?

Is there a reset button on a washing machine?

Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.

How do I fix my LG OE error?

OE can be triggered by a kinked drain hose or a clogged drain pump filter.

  1. Check for kinked drain hose. Check behind the washer to ensure that the drain hose is not kinked or clogged.
  2. Test the drain pump.
  3. Do you hear the humming sound?
  4. Clean drain pump filter.
  5. Run tub clean cycle.
  6. Request Repair.

How do I drain the water from the bottom of my dishwasher?

How to Properly Drain a Dishwasher

  1. Line the floor under the dishwasher with towels or newspaper.
  2. With a measuring cup or a large ladle, scoop the water from the bottom into a bowl or the sink.
  3. When the water becomes too shallow to scoop, soak up the remaining moisture with cloth or paper towels.

How do I test my LG dishwasher drain pump?

Test the drain pump.

  1. Press POWER to turn the washer ON.
  2. Press the SPIN SPEED key until HIGH is selected.
  3. Press the START/PAUSE button to start the SPIN ONLY cycle.
  4. Listen to hear a humming sound which indicates that the drain pump motor has started working.

How do you force a washer to drain?

How to Manually Drain a Top-Loading Washing Machine

  1. Step 1: Turn off the power and lay down towels.
  2. Step 2: Locate the drain hose at the back of the washing machine.
  3. Step 3: Drain the water.
  4. Step 1: Turn off the power and lay down towels.
  5. Step 2: Locate the drain hose.
  6. Step 3: Drain the water.
  7. Step 4: Scrub the filter.
You might be interested:  Readers ask: What Is Error Code 3005 On Pandora On Samsung?

What would cause a washing machine not to drain?

Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.

How do I get my washer to drain?

5 Easy Steps to Get Water Out of Your Washer

  1. Step 1: Power It Down and Turn Off the Water Supply. Start by powering down your machine.
  2. Step 2: See If You Can Drain the Drain Hose.
  3. Step 3: Check Out the Drain Pump.
  4. Step 4: Drain the Interior Manually If Needed.
  5. Step 5: Know When to Call a Professional.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top