FAQ: What Is Printer Error Code 38=2?

How do I fix error code 38?

You may disconnect all USB devices and then perform the following steps:

  1. Right click on Start and select Device Manager.
  2. Double click to expand “Universal Serial Bus controllers”, right click on the Host Controller,click “Uninstall” and.
  3. Restart the system and Windows 10 will reinstall all USB controllers automatically.

How do I clear the error code on my HP printer?

To temporarily clear the error, reset the printer.

  1. With the printer turned on, disconnect the power cord from the printer.
  2. Unplug the power cord from the power source.
  3. Wait 60 seconds.
  4. Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.

What does 59e mean on Canon printer?

It occurs with the Canon printers when the paper information set on your Canon printer doesn’t matches with the printer’s paper settings. In short, that there is a mismatch related to paper settings. So in this case, one needs to ensure that the size of the papers matches with the set on Canon Printer.

You might be interested:  Quick Answer: What Is Error Code 80070002?

What is the meaning of Error 38?

Error 38 means: ” Network out of order “. This cause indicates that the network is not functioning correctly. Immediately reattempting the short message transfer is not likely to be. successful.

What is error code 38 on warzone?

When trying to boot up Modern Warfare or join a match, console players can sometimes be hit by Error Code 38, completely preventing them from playing the game. This usually occurs around the time of updates and can often be caused by the update not installing properly.

Why is my Canon printer giving me an error?

Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you’re trying to print. The loading bay for your paper might have become lodged with paper or you’re using the wrong type of paper.

What does the orange light mean on a Canon printer?

Meaning: the printer is out of paper / No paper. Solution: Reload paper in the rear tray and press the Resume / Cancel button. Meaning: the paper exit tray is closed / Paper jam. Remove the jammed paper, replace the paper correctly in the printer, and then press the Resume / Cancel button.

How do I fix printer in error state?

Sometimes, simply restarting both your computer and printer can be the solution to the “printer in error state” issue. Power off your printer and computer completely, leaving them in this state for a few minutes, then turn them on again to see if the problem is gone.

You might be interested:  Readers ask: How To Fix F51 Error Code?

How do I fix printer errors?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

How do I fix HP printer errors?

Quick fix

  1. Make sure the printer is turned on. You can also restart both the printer and your computer.
  2. Check if the printer is connected to your computer or WI-FI network.
  3. Make sure the paper try of your printer is loaded and that the printer has enough ink.
  4. If the error still occurs, contact the HP printer support.

How do you clear the error on a Canon ts3322 printer?

Press the printer’s OK button to resolve the error. Turn off the wireless router and turn it back on, and then perform setup again. If the above does not resolve the problem, refer to the instruction manual supplied with the wireless router and check the settings.

How do I get my Canon printer out of error state?

How do I get my printer out of an error state?

  1. Make ports settings changes. Press the Windows logo key + R on your keyboard > type devmgmt.msc and hit Enter to open the Device Manager.
  2. Make sure that your printer is Online.
  3. Reinstall the printer driver.
  4. Set the Print Spooler service to automatic.
  5. Update Windows.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top