How Do You Fix An Lg Washer With Error Code Oe?

OE can be triggered by a kinked drain hose or a clogged drain pump filter.

  1. Check for kinked drain hose. Check behind the washer to ensure that the drain hose is not kinked or clogged.
  2. Test the drain pump.
  3. Do you hear the humming sound?
  4. Clean drain pump filter.
  5. Run tub clean cycle.
  6. Request Repair.

How do I force my LG washer to drain?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

Why is my LG washing machine not draining?

Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.

You might be interested:  Often asked: Error Code: 0x81000033 In Windows 7 Operating System When Backing Up?

How do I test my LG washing machine drain pump?

Test the drain pump.

  1. Press POWER to turn the washer ON.
  2. Press the SPIN SPEED key until HIGH is selected.
  3. Press the START/PAUSE button to start the SPIN ONLY cycle.
  4. Listen to hear a humming sound which indicates that the drain pump motor has started working.

How do I manually drain my LG front load washer?

Press the POWER button to turn the washing machine off and remove the plug from the outlet. Locate the service panel on the bottom-left corner of the unit and open it. Unclip the drain hose and remove the plug from the drain hose to drain the water remaining inside the wash tub.

How do you force a washer to drain?

How to Manually Drain a Top-Loading Washing Machine

  1. Step 1: Turn off the power and lay down towels.
  2. Step 2: Locate the drain hose at the back of the washing machine.
  3. Step 3: Drain the water.
  4. Step 1: Turn off the power and lay down towels.
  5. Step 2: Locate the drain hose.
  6. Step 3: Drain the water.
  7. Step 4: Scrub the filter.

What do you do when your washing machine won’t drain?

What to Do When Your Washing Machine Won’t Drain

  1. Perform a Master Reset. Unplug your washer for about one minute.
  2. Test the Lid Switch Assembly.
  3. See if the Drain Hose is Kinked.
  4. Check the Drain Hose or Pump for Clogs.
  5. Clean out the Coin Trap.
  6. Check the Water Level Control.
  7. Schedule Washing Machine Repair.

How do I reset my LG washer?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.
You might be interested:  Often asked: Which Error Code Will Display If A Number Is Used Invalidly In A Cell?

How do I know if my drain hose is clogged?

If the hose is clogged, it can prevent the water from being pumped out of the machine. To test this, remove the drain hose attached to the washer and make sure it is clear. An easy way to check that the drain hose is clear is to blow air through it.

What does the Code OE mean on a LG washer?

OE error code indicates that the washer is unable to drain the water it used during the wash cycle. OE can be triggered by a kinked drain hose or a clogged drain pump filter.

How do I know if my washing machine drain pump is bad?

Check the pump pulley by removing the pump from the washer and trying to rotate it by hand. If the pulley doesn’t turn freely and is frozen or stiff, replace it. Also, if the agitator is moving but the tub isn’t, this is a sign the pump is dying. For front-loading washers, do not attempt to open the door mid-cycle.

How do I troubleshoot my LG washer?

How to Troubleshoot LG Washer Problems

  1. Adjust your clothes.
  2. Check the drum and drain filter for foreign objects.
  3. Adjust the leveling feet at the base of your LG washer.
  4. Check your hoses.
  5. Check the power.
  6. Contact LG customer support, if none of the previous steps help.

How long does LG washer last?

The average life expectancy for washers and dryers is between 10 and 15 years. Front loaders are very efficient.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top