Le Error Code On Lg Front Load Washer When Empty?

An LE error code on the washer’s display indicates that the motor is locked, possibly due to a heavy wash load. Large and heavy sized loads will put a strain on the motor, causing the LE code to occur. Performing a reset on the washer will normally resolve this error with a reduced load size.

Why does my LG washer keep saying Le?

The LE code can indicate that the washer has been overloaded; large loads and bulky items can strain the motor. Remove a few items from the washer to reduce the load size and restart the cycle. If the code appears again, let the washer sit for a half-hour so the motor has time to cool down before you restart the cycle.

Is there a reset button on my LG washer?

If your LG washing machine won’t start, try doing a hard reset on the unit. To perform a reset, start by unplugging your washer. Then, press and hold the power button for 5 seconds. Do the same with the play button.

You might be interested:  Readers ask: Parsec How To Fix Error Code 6023?

How do I clear the IE code on my LG washing machine?

Turn off the home’s hot and cold water supply taps/valve. Remove the water inlet hoses from the washer. Ensure to have a bucket to drain the remaining water from the hoses. Check the inlet filters on the inlet valves of the washer, inspect for any mineral deposits or other debris that may be clogging them.

How do I run a diagnostic on my LG front load washer?

Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.

How do I fix the LE error on my LG washer?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

How do I troubleshoot my LG washer?

How to Troubleshoot LG Washer Problems

  1. Adjust your clothes.
  2. Check the drum and drain filter for foreign objects.
  3. Adjust the leveling feet at the base of your LG washer.
  4. Check your hoses.
  5. Check the power.
  6. Contact LG customer support, if none of the previous steps help.

How do I reset the OE code on my LG washer?

Run tub clean cycle. Perform a TUB CLEAN CYCLE and REDUCE DETERGENT usage. Run the new cycle to see if the code is cleared.

You might be interested:  FAQ: What Is Error Code Ce-41807-0 On My Ps4?

How do I force my LG washer to drain?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

How do I reset my LG washer after power outage?

To complete a power reset on your LG washer, unplug the machine from its power source. Wait at least five minutes before plugging the unit’s electrical cord back into the outlet. Unless there are other problems with the machine, the washing machine should reset.

Why is my LG washer not draining?

Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.

Why does my LG washer stop mid cycle?

Common solutions for: LG Washer stops mid cycle If the washer door is not latched shut, the door switch prevents the washer from operating. If the door lock is defective, the washer may stop mid cycle. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it.

How long does a LG front load washer last?

The average life expectancy for washers and dryers is between 10 and 15 years. Front loaders are very efficient.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top