Often asked: How Do I Fix F9 Error Code On Amana Range?

Reset power to the product: There may be a problem with the Oven Door Latch, the Door Lock Switch, or the associated wiring. Monitor the oven for one (1) minute to ensure the error code does not display again.

How do I fix the F9 on my Amana oven?

F9 – Motorized Door – Check latch and replace if faulty. FF – Lock Error – Check switch and motor. Replace if faulty.

How do I fix F9 error?

Reset the appliance

  1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
  2. Monitor the range or oven for one (1) minute to ensure the error code does not display again.
  3. Verify the range or oven operation.

Why does stove say f9e0?

During a power outage, if there was a surprising amount of power supply line “noise” that the control detected as an incorrect voltage amount, the control could display the F9, F9 E0, or PF Error Code.

You might be interested:  Readers ask: What Is Error Code M7111-5059 On Netflix?

How do I reset my stove?

Turn the circuit breaker to the OFF position or remove the fuse. Wait one minute, then turn the circuit breaker back to the ON position or install the fuse to reset power to the unit. This should reset the electronic controls on the range or wall oven.

How do I reset my Amana front load washer?

How do I reset my Amana washing machine?

  1. Turn off the power to your Amana washer.
  2. Unplug the machine from the power outlet.
  3. Once the power shuts down, you have to press and hold the “Start or Pause” button for five seconds.
  4. Plugin the unit back. Now, your Amana washing machine has been reset.

Why does the oven say F9?

An F9 error code on a General Electric (GE) oven indicates that the oven’s electronic control system has detected a problem with the automatic door lock. The malfunction may be a jammed door lock mechanism, a pinched or broken wire, a faulty lock switch or a fault in the control board itself.

What does F9 mean on my whirlpool?

F9 – Oven Door Lock Failure – Check door lock switches and wiring. Check for stuck lock switch.

What does F9 mean on a Kenmore stove?

The error code “F9” indicates a failure with the latch motor. Since the door did not physically lock, open the door and locate the door light switch plunger.

What does E1 F9 mean on a Whirlpool washer?

F9 E1 Code in the display: This error code indicates that drain times are longer than expected, typically over eight (8) minutes.

You might be interested:  How To R. What Is Error Code F82 On A Whirpool/cro Washern Whirlpool Cabrio Washer?

How do I fix F9E0?

F9E0:

  1. Press CANCEL>CANCEL>START to enter the Diagnostics Mode and verify the failure.
  2. Unplug range or disconnect power.
  3. Verify that the house power supply provides 240 VAC between L1 and L2, and 120 VAC between L1 and N and L2 and N.
  4. Verify that the electric supply is wired correctly at the range terminal block.

What does PF mean Whirlpool oven?

Whirlpool PF – Power failure (not a failure mode) The manufacturer has assigned this error or fault code to indicate that the appliance lost power temporarily. Press CANCEL to clear the display.

How do you reset the code on a Whirlpool stove?

Reset power to the product:

  1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
  2. Power unit up by turning on the circuit breaker(s).
  3. Start a bake cycle.
  4. Monitor the oven for one (1) minute to ensure the error code does not display again.
  5. Verify oven operation.

Is there a reset button on ovens?

2- Do ovens have a reset button? Your oven might also have a circuit breaker with a reset button on the control console or on top of the oven that needs to be reset. If you are still confounded, pull the oven away from the wall.

How do I reset my oven control board?

But the first thing you should do is try to perform a hard reset by unplugging the oven, waiting about 30 seconds, and then plugging it back in again. In some cases, this will be enough to reset the control board and get your oven working again.

You might be interested:  Quick Answer: What Does Error Code 1011 Mean On Netflix?

Why has my electric oven stopped working?

Power Source If only one leg is voltage is shut down by a tripped breaker or a blown fuse, the oven will not power up. If a breaker is tripped or a fuse is blown, reset the breaker or replace the fuse and try turning on the oven once again. If the oven powers up, you have found your problem.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top