Often asked: How To Drain Lg Washer Top Load With Oe Error Code?

Press POWER to turn the washer on. Press the SPECIAL USE key until SPIN ONLY is lit. Press the START/PAUSE button to begin the cycle. The unit should begin a SPIN ONLY cycle and attempt to drain any remaining water that is inside the washer.

How do I get rid of the OE error on my LG washing machine?

OE can be triggered by a kinked drain hose or a clogged drain pump filter.

  1. Check for kinked drain hose. Check behind the washer to ensure that the drain hose is not kinked or clogged.
  2. Test the drain pump.
  3. Do you hear the humming sound?
  4. Clean drain pump filter.
  5. Run tub clean cycle.
  6. Request Repair.

How do I manually drain my LG washer?

Drain Your Washer Manually

  1. Turn off the faucet supplying your washer.
  2. Switch off the power at the wall, or unplug the washer.
  3. Open the access panel.
  4. Place a shallow pan next to the access panel, and pull the drain hose out from its clip so that it will drain into the pan.
You might be interested:  Readers ask: What Is The Netflix Error Code -113?

How do you force a top load washer to drain?

How to Manually Drain a Top-Loading Washing Machine

  1. Step 1: Turn off the power and lay down towels.
  2. Step 2: Locate the drain hose at the back of the washing machine.
  3. Step 3: Drain the water.
  4. Step 1: Turn off the power and lay down towels.
  5. Step 2: Locate the drain hose.
  6. Step 3: Drain the water.
  7. Step 4: Scrub the filter.

How do you force a washing machine to drain?

For a top-loading machine, it is quite simple. To drain the water from your washer manually, start by using a siphon or a bucket to get out most of the water. When it is too low to scoop up any more, use towels to soak up the remaining water.

Why is my LG washing machine not draining?

Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.

What does OE stand for on LG washing machine?

OE error code indicates that the washer is unable to drain the water it used during the wash cycle. OE can be triggered by a kinked drain hose or a clogged drain pump filter.

How do I force my LG dishwasher to drain?

Force the Drain. This is activated by pressing and holding 2 buttons simultaneously e.g DELICATE + DUAL CONTROL. The 2 buttons may vary depending on your model. If your model does not have a CANCEL & DRAIN option, start a cycle, let it run for 45 seconds, then power the unit off.

You might be interested:  FAQ: What Does This Xbox Live Error Code Mean 80151012?

What causes washing machine not to drain water?

There are a few possibilities why your washing machine won’t drain. Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.

What do you do when your washing machine won’t drain?

What to Do When Your Washing Machine Won’t Drain

  1. Perform a Master Reset. Unplug your washer for about one minute.
  2. Test the Lid Switch Assembly.
  3. See if the Drain Hose is Kinked.
  4. Check the Drain Hose or Pump for Clogs.
  5. Clean out the Coin Trap.
  6. Check the Water Level Control.
  7. Schedule Washing Machine Repair.

How often should you drain your washing machine?

Washing machines can be breeding grounds for salmonella and other germs. When you wash items in hot water, your machine is being cleaned as well, but once a month, you should still run an empty load with hot water and about a cup of distilled white vinegar to sanitize the basin and wipe out any lingering germs.

How do I know if my washing machine drain pump is bad?

Check the pump pulley by removing the pump from the washer and trying to rotate it by hand. If the pulley doesn’t turn freely and is frozen or stiff, replace it. Also, if the agitator is moving but the tub isn’t, this is a sign the pump is dying. For front-loading washers, do not attempt to open the door mid-cycle.

Why is my washing machine filling up and draining at the same time?

If your washer is draining the water at the same time it is filling with water, please check the following: Make sure that the house drain pipe is at least 30 inches high. If so, check to make sure the drain hose is not pushed too far down into the drain. There must be an air gap around the drain hose.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top