Often asked: How To Fix Error Code 0xc000014c On Lenovo Laptop?

f) Click on Command Prompt and run the following commands.

  1. Type BOOTREC /FIXMBR, and then press ENTER.
  2. Type BOOTREC /FIXBOOT, and then press ENTER.
  3. Type BOOTREC /REBUILDBCD, and then press ENTER.
  4. Let us know if it helps. If the issue persists, we will be happy to help you further.

How do I fix error code 0xc000014c?

Fix 0xc000014C in Windows 8, 8.1, 10

  1. Insert the installation disc.
  2. Restart your computer.
  3. Press any key to boot from the disc, at the “Press any key to boot from CD or DVD…” message.
  4. Choose your keyboard layout.
  5. Select your language, time and a keyboard method.
  6. Click Next.
  7. Click Repair your computer.

What causes error 0xc000014c?

Corrupted System Files: Malware, damaged and corrupted system files can cause Error code 0xc000014c. Inconsistency of System Files: When the computer turns off suddenly amidst of writing important data to the boot sector, the error code 0xc000014c might occur.

What causes boot BCD error?

One of the most common causes of this error is the BCD that became missing or corrupt. That could happen because of disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually.

You might be interested:  Readers ask: How To Fix F11 Error Code On Stove?

What is a BCD error?

The BCD holds important boot-related information including the list of the available operating systems. ADVERTISEMENT. In short, it stores vital boot information required to start Windows. If the BCD is missing, corrupt or altered, Windows may not start properly anymore but display the Recovery screen at the top.

What does Bootrec ScanOs do?

bootrec /ScanOs will scan the hard drives for any installations. ScanOs will also print installations that are not currently in the BCD. bootrec /RebuildBcd will scan for installations on your hard drive and allows you to select which to add to the BCD.

How do I fix oxc000000f?

How to Fix Error Code 0xc000000f on Windows

  1. Solution 1: Check and Change Power Cord and Remove External Devices.
  2. Solution 2: Start Your Computer Using Bootrec.exe Utility.
  3. Solution 3: Use Startup Repair to repair BOOTMGR.
  4. Solution 4: Rebuild the BCD manually.
  5. Solution 5: Check your data cables, BIOS, and drivers.

How do I get into WinRE mode?

Your users can access WinRE features through the Boot Options menu, which can be launched from Windows in a few different ways: From the login screen, click Shutdown, then hold down the Shift key while selecting Restart.

How do I manually rebuild my BCD?

How to Rebuild the BCD in Windows 10, 8, 7, or Vista

  1. On Windows 10 or Windows 8: Start Advanced Startup Options.
  2. In Windows 10/8, select Troubleshoot > Advanced options.
  3. Select the Command Prompt button to start it.
  4. At the prompt, type the bootrec command as shown below, and then press Enter: bootrec /rebuildbcd.
You might be interested:  Readers ask: How To Fix Honda Radio Error Code?

Where is Boot BCD located?

Where is the BCD file in Windows 10? It is stored in a file in folder “Boot”. The full path to this file is “[active partition]BootBCD”. For UEFI boot, the BCD file is located at /EFI/Microsoft/Boot/BCD on the EFI System Partition.

How do I open a BCD file?

How to open file with BCD extension?

  1. Install Microsoft Registry Editor software.
  2. Check the version of Microsoft Registry Editor and update if needed.
  3. Assign Microsoft Registry Editor to BCD files.
  4. Verify that the BCD is not faulty.

How do you fix boot failure?

Fixing “Disk boot failure” on Windows

  1. Restart the computer.
  2. Open the BIOS.
  3. Go to the Boot tab.
  4. Change the order to position the hard disk as the 1st option.
  5. Save these settings.
  6. Restart the computer.

What is boot BCD?

Boot Configuration Data (BCD) is a firmware-independent database for boot-time configuration data. It is used by Microsoft’s new Windows Boot Manager and replaces the boot. ini that was used by NTLDR. For UEFI boot, the file is located at /EFI/Microsoft/Boot/BCD on the EFI System Partition.

How do I fix Windows Boot Manager error without disk?

To fix BOOTMGR is missing in Windows 7 without CD, you can create a bootable USB from ISO and then boot the PC from the USB drive to enter the Windows Recovery Environment. Click the Repair your computer option after selecting your language, time and keyboard method.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top