Often asked: My Wife’s Windows 7 Pc Is Getting A Error Code 0xc000000e. How Do I Fix This?

6 fixes for 0xc000000e error

  1. Disconnect external devices.
  2. Perform startup repair.
  3. Rebuild the BCD.
  4. Change the SATA mode.
  5. Reset the BIOS settings to default.
  6. Repair your Windows computer.

How do I fix error code 0xc000000e in Windows 7?

Fix #7: Check your disk with CHKDSK utility

  1. Boot from your Windows install disc.
  2. Click on Repair your computer after selecting proper language, time and keyboard input.
  3. Select the Windows installation drive, which is usually C:, and click Next.
  4. Choose Command Prompt when the System Recovery Options box appears.

What does status 0xc000000e mean?

Recovery Error code 0xc000000e, Your PC needs to be repaired, indicates a hardware failure or an incorrect drive configuration, and may be accompanied by different error messages like: A required device isn’t connected or cannot be accessed. Required device is inaccessible.

How do I fix Windows Start error?

Fix #5: Rebuild the master boot sector

  1. Insert your Windows install disc.
  2. Press any key at the “Press any key to boot from CD or DVD” message.
  3. Choose Repair your computer after you select the language, time and keyboard method.
  4. Select your Windows installation drive (usually C: ) and click Next.
You might be interested:  Often asked: What Is The Error Code 3-0x0001000b?

How do I fix boot selection failed?

HP PCs – Error: The Boot Selection Failed Because a Required Device Is Inaccessible (Windows 8, 7)

  1. Step 1: Check the computer cable connections.
  2. Step 2: Remove all external devices.
  3. Step 3: Select a different boot device.
  4. Step 4: Use the bootrec.exe tool in the Windows Recovery Environment.

How do I reset my BCD?

How to Rebuild the BCD in Windows 10, 8, 7, or Vista

  1. On Windows 10 or Windows 8: Start Advanced Startup Options.
  2. In Windows 10/8, select Troubleshoot > Advanced options.
  3. Select the Command Prompt button to start it.
  4. At the prompt, type the bootrec command as shown below, and then press Enter: bootrec /rebuildbcd.

How do I update Windows boot Manager?

To edit boot options in Windows, use BCDEdit (BCDEdit.exe), a tool included in Windows. To use BCDEdit, you must be a member of the Administrators group on the computer. You can also use the System Configuration utility (MSConfig.exe) to change boot settings.

How do I fix my computer needs to be repaired boot configuration BCD error code 0xc0000098?

Here are the steps to rebuild the BCD:

  1. Boot from the Windows install disc.
  2. Click on Repair your computer after selecting proper language, time and keyboard input.
  3. Select the Windows installation drive, which is usually C:, and click Next.
  4. Choose Command Prompt when the System Recovery Options box appears.

How do I fix error code 0xc000000f without disc?

How to Fix Error Code 0xc000000f on Windows

  1. Solution 1: Check and Change Power Cord and Remove External Devices.
  2. Solution 2: Start Your Computer Using Bootrec.exe Utility.
  3. Solution 3: Use Startup Repair to repair BOOTMGR.
  4. Solution 4: Rebuild the BCD manually.
  5. Solution 5: Check your data cables, BIOS, and drivers.
You might be interested:  FAQ: How To Reinstall Spotify Error Code 18?

How do I fix boot configuration data is missing?

Next, follow these steps:

  1. Insert your installation media into the computer. More Videos.
  2. Boot to the media.
  3. Click Next on the Windows Setup menu.
  4. Click “Repair your computer.”
  5. Choose Troubleshoot.
  6. Select “Advanced options.”
  7. Pick “Command Prompt.”
  8. Type Bootrec /fixmbr and press the enter key.

How do I fix Windows 7 failed to start?

On the System Recovery Options menu, select Startup Repair, and then follow the on-screen instructions. When it completes, restart your computer to see if it fixed the problem. When the startup repair process is done, you may restart your computer and check if Windows failed to start Windows 7 error disappears.

How do I fix Windows 7 errors?

You can fix Windows Error Recovery errors using these methods:

  1. Remove recently added hardware.
  2. Run Windows Start Repair.
  3. Boot into LKGC (Last Known Good Configuration)
  4. Restore Your HP Laptop with System Restore.
  5. Recover the Laptop.
  6. Perform Startup Repair with a Windows installation disc.
  7. Reinstall Windows.

How do I reboot my computer Windows 7?

The quickest way to reboot Windows 7, Windows Vista, or Windows XP is through the Start menu:

  1. Open the Start menu from the taskbar.
  2. In Windows 7 and Vista, select the small arrow next to the right of the “Shut down” button. Windows 7 Shut Down Options.
  3. Choose Restart.

How do you fix the boot selection failed because a required device is inaccessible Windows 7?

HP PCs – Error: The Boot Selection Failed Because a Required Device Is Inaccessible (Windows 8, 7)

  1. Step 1: Check the computer cable connections.
  2. Step 2: Remove all external devices.
  3. Step 3: Select a different boot device.
  4. Step 4: Use the bootrec.exe tool in the Windows Recovery Environment.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top