Often asked: What Does The Error Code Sc Mean On A Samsung Washer?

Why does my Samsung washing machine keep saying SC?

The most common reason for this error is a blocked filter or a kinked drain hose. You should also check that the drain hose has been installed properly and clean the hose thoroughly to remove any blockages that may be preventing your washing machine from draining properly.

How do I clean the mesh filter on my Samsung washer?

To prevent water from running out due to the air pressure in the water supply hose, cover the hose connection with a cloth. Gently pull out the mesh filter (s) from the water supply intakes using a pair of pliers. And rinse they(them)m under running water until they are clean. Reinsert the mesh filter(s).

How do I reset my Samsung washing machine?

Reset your washing machine Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.

You might be interested:  What Is Error Code A.B.C.-.-.F.G-.-.-.-.-.-.-.-.-.-.-.-.-.?

How do I know if my washing machine drain is clogged?

Test the drain by pouring water into it, if it has been backing up. If it’s clogged, you should be able to clear the clog with a plumbing auger.

How do you know if your washing machine drain hose is clogged?

If the hose is clogged, it can prevent the water from being pumped out of the machine. To test this, remove the drain hose attached to the washer and make sure it is clear. An easy way to check that the drain hose is clear is to blow air through it.

Why is my Samsung washing machine not draining?

If your washing machine isn’t draining or filling, the most likely cause is a clogged filter, or clogged or twisted hose. This may display as a 4E/4C or 5E/5C error message on your machine. Follow these links for step-by-step guides to cleaning your debris filter and cleaning your mesh filter.

Are you supposed to clean your washing machine filter?

It is recommended that you clean your filter every 4 months. The filter will collect hair, coins, and tissues, so it is important to it clean regularly. Even if you don’t have time to do a thorough clean every few weeks, it’s not a bad idea to check your filter for any possible build up.

Where is the debris filter on a Samsung washer?

Have a look at the bottom part of the front panel of the washer. Open it using a flathead screwdriver, because some laches may secure it. After removing the panel, you will see the filter – a plastic part with a shaped inbuilt handle.

You might be interested:  Quick Answer: What Does Neflix Error Code M7121-1331-4027 Mean?

How do I fix my Samsung washer error?

TO FIX THE DE ERROR CODE: – Unplug the washing machine and then open the door. -Use light force to open the door if it does not open. NOTE: Forcing the washer door open can damage the door lock and switch assembly. -Replace the complete door lock assembly if it is faulty or broken.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top