Question: Every Time I Run My Lg Dishwasher It Fails And I Did An Error Code Of Fe What Does This Mean?

An FE error on your dishwasher indicates that your unit has experienced a fill error. The dishwasher has detected that there is too much water in the unit, and the drain pump is automatically turned on. This can usually be corrected by performing the following steps: Press the POWER button to turn the dishwasher off.

How do I clear the error on my LG dishwasher?

An HE error can usually be corrected by performing the following steps:

  1. Press the POWER button to turn the dishwasher off.
  2. Turn the circuit breaker to the dishwasher OFF and wait 10 seconds.
  3. Turn the circuit breaker to the dishwasher back ON.
  4. Press the POWER button to turn the dishwasher ON and start a new cycle.

Why does my LG dishwasher keep shutting off?

Reasons for a Dishwasher Stopping Mid Cycle If your dishwasher keeps beeping and stopping, the odds are that the door latch is loose. The reason why the dishwasher is stopping mid cycle is that the sensor on the door latch is shorted or is obscured. It could also mean that the door latch is simply broken.

You might be interested:  Quick Answer: What Does Error Code 3000 Mean On Twitch?

How do I get rid of Internet Explorer error on my LG dishwasher?

Check the water supply hose Make sure that the line is not kinked or sharply bent. Check the filter on the water supply hose. Unplug the appliance and turn off the water tap or water valve. Unscrew the water supply hose.

What does Snowflake mean on LG dishwasher?

The “snowflake” light indicates that the rinse aid needs to be refilled, although the user manual doesn’t specify whether it is blinking or is on steady when there is no rinse aid left.

Is there a reset button on my LG washer?

If your LG washing machine won’t start, try doing a hard reset on the unit. To perform a reset, start by unplugging your washer. Then, press and hold the power button for 5 seconds. Do the same with the play button.

Why does my dishwasher shut off after a few minutes?

Dishwasher Door Not Securely Closed If your dishwasher shuts off after a few minutes, check to make sure the dishwasher door was not opened suddenly during the wash cycle and then not closed completely to restart the cycle. The dishwasher will not run if the door is open, so push the door closed firmly.

Why is my LG dishwasher flashing?

Common solutions for: LG Dishwasher lights flashing or blinking. The heating element heats up the water to operating temperature. If the water doesn’t reach the proper temperature after a set amount of time, a light on the control panel might start flashing. If the heating element does not have continuity, replace it.

You might be interested:  Question: What Does Error Code P061c, P2106 Mean In My Car?

Why does my LG dishwasher not turn on?

If the thermal fuse blows, it will prevent the dishwasher from starting. To determine if the thermal fuse is defective, use a multimeter to test the fuse for continuity. If the door does not latch properly, the door switch might prevent the dishwasher from running. If the door latch is broken, replace it.

What does IE mean on my LG dishwasher?

An IE error code signifies that the washing machine is filling with water slowly or not at all. This can occur when water supply taps are not fully open or the water pressure to the tap or house is too low.

Why is my LG dishwasher counting down from 4?

Counting 4,3,2,1 appears in display The door is sensing a problem with the latch system. Normally it is related to improper installation.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top