Question: How Do You Get Error Code On Frigidaire Washer With No Display?

Frigidaire washers that do not have a time display will pass error codes by flashing the bank of 5 lights for the first number of the error followed by the start light flashing the second number.

How do you reset a Frigidaire washing machine?

Tip

  1. Locate the “Pause/Cancel” button on the front panel of the washer.
  2. Press the “Pause/Cancel” button. This pauses a load if one is currently washing.
  3. Press the “Pause/Cancel” button again. This cancels the settings and resets them.

How do you reset the code on a Frigidaire Affinity washer?

How to Reset the Settings on a Frigidaire Front Washer

  1. Verify that your Frigidaire front washer is plugged into a working electrical outlet and turned on; otherwise, you won’t be able to reset it.
  2. Press and hold the “Spin Speed” and “Soil Level” buttons together for a few seconds.

How do you find the code on a Frigidaire front load washer?

How to retrieve the error codes in a Frigidaire Affinity front

  1. Wake the washer by pressing any button.
  2. Wait 5 seconds.
  3. Press and HOLD the Start/Pause and Cancel buttons simultaneously.
You might be interested:  Often asked: What Error Code Is 405?

How do you reset a Frigidaire top load washer?

If you have set your Frigidaire washer to a setting you don’t want to use, you can easily reset the washer.

  1. Press the “Cancel” button on the washer’s display.
  2. Turn the knob or push the button to select a new cycle.
  3. Press “Start.” You have now reset your Frigidaire washer.

Why is my Frigidaire washer not working?

Make sure that your washer is properly connected to power. Check for fuses or breakers. If you are sure that the problem is not power-related, check the water supplies. If your washer still does not start after an hour, multiple parts might be affected and need to be repaired or replaced.

What does E3 mean on Frigidaire washing machine?

Error code E3, FD, Lid will not lock or remains locked. Clicking noise. Parts: Lid Lock Assembly – 5304511338.

How do you run a diagnostic on a Frigidaire refrigerator?

How to Enter the Diagnostic Mode on a Frigidaire Refrigerator

  1. Press and hold the “Freezer Temperature UP” and the “Freezer Temperature DOWN” buttons at the same time.
  2. Release and press the buttons together twice more within five seconds to enter the diagnostic mode to test the Frigidaire.

How do you reset a front loader washing machine?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.
You might be interested:  FAQ: How Tofis Comcast Error Code Xre-03121?

Why has my washing machine stopped spinning?

Drain pump blockage One of the most common reasons why your washing machine has stopped spinning is when it can’t drain properly due to a blocked drain pump. This can happen when something gets stuck in the outlet pipe, preventing the steady flow of water in and out of the machine.

How do you run a diagnostic test on a Frigidaire Affinity washer?

Frigidaire Affinity Washer Diagnostics

  1. Wake the washer by pressing any button.
  2. Press and hold the Start/Pause and Cancel buttons.

How do I find the error code on my Frigidaire Affinity Dryer?

How to Retrieve the Error Codes in a Frigidaire Affinity Front

  1. Press and release any button on the dryer’s display panel to awaken it from idle mode.
  2. Wait for 5 to 10 seconds then push and hold “Start/Pause” and “Cancel” at the same time.
  3. Watch for the indicator lights on the control panel to flash.

How do I troubleshoot my Frigidaire Affinity washer?

How to Troubleshoot a Frigidaire Affinity Washer

  1. Stop the washing machine if rattling or clanking sounds occur.
  2. Redistribute the load if you hear a thumping sound.
  3. Level the washer if the machine vibrates.
  4. Plug the power cord in and check household fuses or breakers.
  5. Turn the water supply faucets on completely.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top