Question: How To Fix Error Code 5b00 Canon Mx870?

What can I do if I get the Canon printer error 5b00?

  1. Reset the waste ink counter. Firstly, unplug the power and the USB cables from the printer.
  2. Manually clean the waste ink pad. Open the ink cartridge compartment.
  3. Other potential solutions. If the print head is not clean, this can often lead to this error.

How do I fix error code 5b00 on my Canon printer?

How to fix Canon printer error 5b00

  1. Step 1: Unplug the device.
  2. Step 2: Press down and continue to hold the power button of the printer and plug the power cord into the wall socket.
  3. Step 3: Hold the power button until the printer starts resetting itself.
  4. Step 4: Wait for the green power light in the printer to turn off.

How do I reset my canon mx870 ink cartridge?

To do this, please press and hold down the STOP/RESET or RESUME/CANCEL button on the printer for at least 7 seconds, then release it. Once the ink tank is replaced with a Canon genuine ink tank, the ink level detection function of the printer will be re-enabled.

You might be interested:  Quick Answer: What Is This Error Code 0x80070020?

How do I clear the fault on my Canon printer?

Reset the Canon printer

  1. Switch on the printer.
  2. Press and hold the Stop/reset button.
  3. Press the button that you use to make a color copy and hold it down.
  4. Wait 5 seconds.
  5. The printer now reboots and sets itself up.
  6. Does the printer indicate that the device needs to be calibrated?
  7. You’ve reset your printer.

Where is the ink absorber on a Canon mx870 printer?

The main ink absorber is located at the bottom of the printer which is in the form of pieces of ink absorbent pads or so-called “Ink absorber kit”.

Why the ink absorber is full?

The message Ink Absorber Full is an indication that the machines internal ink absorbers are almost full. These ink absorbers are used to hold ink after it has been purged from the print head during the print head cleaning cycles. In order to clear this message the ink absorbers inside the machine must be replaced.

What do I do if my Canon printer ink absorber is full?

Press and hold the “Power” button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the “Power” button again. This resets the printer’s internal memory and overrides the “Ink Absorber Full” error code.

How do you reset Canon ink cartridges?

Open the cartridge door and hold down the power button. Reconnect the power cables while still holding down the power button. Close the cartridge door and release the power button. The ink cartridge is now reset.

You might be interested:  Readers ask: What Is Error Code 11004?

How do you reset Canon low ink?

You will need to hold the COLOR button (or black button) AND the STOP button for 5-8 seconds to reset the ink level monitor/counter feature. NOTE 2: Following printer reset the ink low indicator may remain illuminated (steady, but not flashing) and you should still be able to print.

How do I fix printer error has occurred?

To resolve this, check the printer paper feed tray and remove any physical object that is preventing the tray from opening. After a thorough inspection, turn off the printer. Turn on the printer and try to print again. Check for any improvements.

How do I fix canon 5011 error?

Fix: Canon Printer Error 5011

  1. Unplug your printer and let it stay off for 3 minutes, then power it back on and test. If it doesn’t work, then turn it off again.
  2. Lift the lid from the printer, including the scanner. With the lid open, turn the printer back on.
  3. Then close the lid and see if that fixes the issue.

Why is my Canon printer giving me an error?

Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you’re trying to print. The loading bay for your paper might have become lodged with paper or you’re using the wrong type of paper.

How do you fix a full ink absorber?

Press and hold the “Power” button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the “Power” button again. This resets the printer’s internal memory and overrides the “Ink Absorber Full” error code.

You might be interested:  Readers ask: How To Fix Error Code 003-1101 On New 2ds?

Where is the ink absorber on a Canon printer?

Locate the waste ink absorbers in their black rubber frame. They will likely be on the right side of your printer, and will be located underneath the area where the ink cartridges rest when the printer is in standby mode.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top