Question: What Does Error Code E-24 Mean On A Bosch Diswasher?

It means that the dishwasher is not draining properly due to the drain filter being blocked. Possible causes for the E24 error code: The drain hose could be blocked. The dishwasher filter may need to be cleaned. Brand new garbage disposal.

How do I fix error code E24 on Bosch dishwasher?

If your Bosch dishwasher is displaying an “E24” error code, it means that the dishwasher is not draining properly.

  1. Clean the Filter.
  2. Check the Drain Pump.
  3. Check for Kinked Hoses.
  4. Clean the Dishwasher.
  5. Check the Air Gap / Disposal / S-Trap.
  6. Check the Drain Hose & Drain Pump.

How do you reset Bosch error code?

How to reset an error code on a washing machine by Bosch, Neff, or Siemens. Press and hold down on the spin button and simultaneously turn the dial to the 7 o’clock position. Hold the spin button for around 5 seconds and then release.

How do I fix my Bosch E25 error?

Clean the Filter Depending on the model, many Bosch dishwashers have a removable filter at the bottom of the dishwasher. While the e25 error code points to a drain pump issue, cleaning and removing the filter may also fix the issue. To access the filter, remove the bottom dish rack and spray arm (if necessary).

You might be interested:  Readers ask: A Problem Occurred When Windows Tried To Activated Error Code 0xc004f063?

How do you unclog a dishwasher drain?

Clean the Drain with Baking Soda and Vinegar Use a DIY mixture of equal parts baking soda and vinegar to unclog the drain. Pour the solution into the basket at the bottom. Let it sit for 15 minutes. Finish by pouring hot water down the basket and running the rinse cycle.

Where is the error code on a Bosch dishwasher?

Error codes for Bosch display dishwashers. Error codes are shown in alphanumeric format E on Bosch dishwashers screen; At the same time, some models display the prefix “E” instead of the “F” one.

Why is there standing water in the bottom of my Bosch dishwasher?

If your dishwasher is clogged and not draining, check the filter and pump (located at the bottom of the dishwasher). Check the pump and remove any debris and standing water you find with a sponge. Use caution as some debris may be sharp. Reinstall the pump cover and filter.

Why is there water in the bottom of my Bosch dishwasher?

Answer: A little water sitting below the filter is normal. It's possible that there isn't a check valve which can cause it or the way the older Bosch dishwashers work, they don't completely dry, so a small amount of water can gather. If that's the case, leave the dishwasher cracked open to dry and clean the filter.

How do you run a diagnostic on a Bosch dishwasher?

To conduct a test cycle, hold down the “Power Scrub Plus” and “Regular Wash” button (or "Wash" and "Eco"). While these buttons are held down, press the “On/Off” button. The lights above the buttons will flash. Next, test the status of the individual dishwasher programs by pressing the button for each program.

How do I fix E04 error?

Try to clean the sprinkler: Remove the detail. Rinse under the running water. Clean the nozzles (holes) using a toothpick. Try to reset the E04 code:

  1. disconnect the Bosch dishwasher from the mains;
  2. wait for 10-15 minutes;
  3. re-start the appliance.

Is there a reset button on a dishwasher?

Can you reset your dishwasher? Yes, you can reset your dishwasher by pressing the Start/Reset button on the appliance and waiting a few minutes. If your dishwasher still doesn't start, you may need to reboot the entire system by turning off power to the appliance at the house circuit breaker or fuse box.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top