Question: What Does Error Code Oe Mean On Lg Washing Machine?

OE error code indicates that the washer is unable to drain the water it used during the wash cycle. OE can be triggered by a kinked drain hose or a clogged drain pump filter.

How do I force my LG washer to drain?

If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.

How do I fix the OE code on my LG top load washer?

OE Error Code – Top Load Washer

  1. Press POWER to turn the washer on.
  2. Press the SPECIAL USE key until SPIN ONLY is lit.
  3. Press the START/PAUSE button to begin the cycle.
  4. The unit should begin a SPIN ONLY cycle and attempt to drain any remaining water that is inside the washer.

How do I clear the OE code on my LG dishwasher?

OE Error Code – Dishwasher

  1. Check for food debris. If you notice any food debris in the tub of your dishwasher, remove larger food debris and items that may not wash out.
  2. Clean the filter.
  3. Check the drain hose.
  4. Check the air gap.
  5. New dishwasher or gabage disposal.
  6. Force the Drain.
  7. Request a Repair.
  8. Important Tip.
You might be interested:  What Is Error Code 0x080002d?

Why is my LG washing machine not draining?

Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.

How do I manually drain my LG front load washer?

Press the POWER button to turn the washing machine off and remove the plug from the outlet. Locate the service panel on the bottom-left corner of the unit and open it. Unclip the drain hose and remove the plug from the drain hose to drain the water remaining inside the wash tub.

How do I reset my LG washer?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

How do I test my LG washing machine drain pump?

Test the drain pump.

  1. Press POWER to turn the washer ON.
  2. Press the SPIN SPEED key until HIGH is selected.
  3. Press the START/PAUSE button to start the SPIN ONLY cycle.
  4. Listen to hear a humming sound which indicates that the drain pump motor has started working.

Where is the drain pump on a LG washing machine?

The pump on an LG machine is located in the front of the washer on the bottom left near the floor. The LG front-load washer has an accessible drain filter to help keep lint and objects out of the pump.

You might be interested:  Question: How To Reset A 6962 Hp Printer Error Code 0x6100004a?

How much does it cost to fix a washing machine drain pump?

Washing machine pump 2 repairs are usually required when you note active leaks or a tub that doesn’t drain. If a pump is no longer working, it’s a relatively easy fix for a contractor and extends the lifetime of your appliance. On average, expect to spend $300 to $400 for a pump replacement job.

What does IE mean on my LG dishwasher?

An IE error code signifies that the washing machine is filling with water slowly or not at all. This can occur when water supply taps are not fully open or the water pressure to the tap or house is too low.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top