Question: What Is The Error Code E1f5 On A Whirlpool Oven?

The E1- F5 error is a door lock error. If these suggestions don’t help, you will need a technician to diagnose and repair the problem. Sometimes when you disconnect power to a range and reconnect it the electronic range control gets confused.

What does E1 F5 mean on a Whirlpool oven?

Ranges, Whirlpool, Appliances. The error code E1-F5 indicates a door latch switch failure or a door lock motor/solenoid failure. A technician will be required to make these checks. If the door latched: Disconnect power to the range.

How do you clear a Whirlpool oven code?

Plug the oven power cord back in or turn ON circuit breaker. Press CANCEL on the display. If fault code comes back after 1 minute then replace the keypad. If F2 E0 persists then replace the electronic oven control.

How do I reset my Whirlpool oven?

Reset power to the product:

  1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
  2. Power unit up by turning on the circuit breaker(s).
  3. Start a bake cycle.
  4. Monitor the oven for one (1) minute to ensure the error code does not display again.
  5. Verify oven operation.
You might be interested:  Quick Answer: If A Computer Screen Goes Blue With An Error Code What Do You Do?

What does F5E1 mean on my oven?

The error F5E1 indicates the over door latch is not operating. If the door latches and the code displays then it is most likely the control but if it does not latch at all then the latch mechanism is most likely bad.

What is F5 error code?

An F5 error code indicates that the fan on the outdoor or indoor unit has been running at a very low speed for a set period of time. This occurs when either the controller on the board or the fan malfunctions.

What does E1 mean on a Whirlpool oven?

F7-E1 – Common Switch Wire Is Defective – This error occurs when common wire to latch switch and door switch is shorted. Check all connections at control board and at the latch switch and door switch.

Why is my Whirlpool oven not working?

An electric oven not heating up can often be attributed to a defective bake element. This Whirlpool oven heating element is a metal coil located at the bottom of electric ovens. When you turn on the oven, wires inside the coil receive electrical current that heats the metal, providing the heat you need to cook food.

Is there a reset button on ovens?

2- Do ovens have a reset button? Your oven might also have a circuit breaker with a reset button on the control console or on top of the oven that needs to be reset. If you are still confounded, pull the oven away from the wall.

How do you unlock the control panel on a Whirlpool stove?

Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on. Allow the oven to cool, approximately 30-90 minutes, move the latch arm to the left to unlock the door.

You might be interested:  Often asked: What Does Error Code C000on Pixma 922 Printer?

Why does my oven keep beeping and F5?

A two-digit Whirlpool F5 code is a control board failure, according to Appliance Parts Pros, and the control board will need to be replaced.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top