Quick Answer: Frigidaire Affinity Washer Error Code E11 Why Can’t I Do Reset?

The “E11” error occurs when the washer takes too long to fill with water. After a set amount of time, the washer stops filling and will automatically drain if not enough water has been added.

How do you clear error codes on Frigidaire Affinity washer?

To clear latest stored error code:

  1. Turn the program knob clockwise 9 clicks from the Start Position. The control will signal the last error code.
  2. Press and hold the Options and Pause Cancel buttons for 3 seconds. The code will be cleared.
  3. Exit Diagnostic Mode to return the washer to normal operation.

How do you reset the code on a Frigidaire washing machine?


  1. Locate the “Pause/Cancel” button on the front panel of the washer.
  2. Press the “Pause/Cancel” button. This pauses a load if one is currently washing.
  3. Press the “Pause/Cancel” button again. This cancels the settings and resets them.
You might be interested:  Quick Answer: How To Fix Roblox Error Code 103?

How do you fix an E11 error on a washing machine?


  1. Check the water supply to ensure that the water pressure is proper.
  2. Clean the filter in the inlet hose next to the tap.
  3. Clean the filter in the inlet hose next to the tap.
  4. Ensure the correct position of the drain hose.
  5. Ensure correct drain height.
  6. Clean the pump and filter.

How do I reset my Frigidaire top load washer?

If you have set your Frigidaire washer to a setting you don’t want to use, you can easily reset the washer.

  1. Press the “Cancel” button on the washer’s display.
  2. Turn the knob or push the button to select a new cycle.
  3. Press “Start.” You have now reset your Frigidaire washer.

How do you reset a Frigidaire Affinity front load washer?

How to Reset the Settings on a Frigidaire Front Washer

  1. Verify that your Frigidaire front washer is plugged into a working electrical outlet and turned on; otherwise, you won’t be able to reset it.
  2. Press and hold the “Spin Speed” and “Soil Level” buttons together for a few seconds.

How do I troubleshoot my Frigidaire Affinity washer?

How to Troubleshoot a Frigidaire Affinity Washer

  1. Stop the washing machine if rattling or clanking sounds occur.
  2. Redistribute the load if you hear a thumping sound.
  3. Level the washer if the machine vibrates.
  4. Plug the power cord in and check household fuses or breakers.
  5. Turn the water supply faucets on completely.

Is there a reset button on a washing machine?

Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Some machines have a button you push to reset its motor. On a machine without a reset button, unplugging the washer and then plugging it back in often serves as the means to reset it.

You might be interested:  FAQ: What Is Netflix Error Code M7053-1803?

Can I reset my washing machine?

First, you should perform a general reset of the machine. Turn the machine off at the powerpoint, wait for one minute, and then turn it back on. Open and close the door of the washing machine 6 times within 12 seconds. Then, run the rinse/spin cycle without clothing to see if your problems are resolved.

How do I reset my front load washer?

How to reset the washing machine:

  1. Press POWER to turn the washer off.
  2. Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
  3. With the power disabled, press and hold the START/PAUSE button for 5 seconds.
  4. Plug the washer back in, or turn the circuit breaker back on.

What does code E11 mean?

An E11 error code on a Hoover washing machine will indicate that you have a fault with the drying sensor. If the drying sensor is damaged or faulty then you will find yourself with a washer dryer with won’t dry your clothes after they have been washed.

How do I fix E10 error on my washing machine?


  1. Check the water supply.
  2. Clean the filter in the inlet hose next to the tap.
  3. Ensure correct position of the drain hose.
  4. Ensure correct drain height.
  5. Clean the pump and filter.
  6. Check for blocked drain.
  7. Check the drainage hose for possible kink or twist.
  8. Use less soap powder.

What does E 10 mean on washing machine?

Washer dryer displays error message E10, C1 or emits 1 beep / 1 flash. It indicates a problem with not taking in water, not taken in enough water or problems with the drain.

You might be interested:  Often asked: Where Can I Find The Last Bsod Error Code In My Computer?

How do you run a diagnostic test on a Frigidaire Affinity washer?

Frigidaire Affinity Washer Diagnostics

  1. Wake the washer by pressing any button.
  2. Press and hold the Start/Pause and Cancel buttons.

Why does my Frigidaire washer keep stopping?

Common solutions for: Frigidaire Washer stops mid cycle If the door lock is defective, the washer may stop mid cycle. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. The lid switch assembly prevents the washer from spinning when the lid is open.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top