Quick Answer: How To Fix A Maytag Washer 4000 Serie F21 Error Code?

Possible Causes and Action:

  1. Turn the washer ON to verify the pump operates.
  2. Check the drain hose and make sure it is not plugged or kinked.
  3. Unplug the washer or disconnect power.
  4. Check the electrical connections at the pump and make sure the pump is running.
  5. Check the drain pump filter for foreign objects.

How do I fix Error 21 on my washing machine?

You can fix this by switching off the machine and shaking the drum forwards and backwards several times. Clean the drain pump/filter and then run a hot wash without any soap powder.

What does F21 mean on a Maytag 4000 Series washer?

What is an F21 or F02 Error Code on my Maytag Front Load Washer? These error codes indicate that drain times are longer than expected.

How do I reset my Maytag 4000 washer?

How to Reset a Maytag Washer

  1. Press the “Power/Cancel” button.
  2. Push the appropriate button to choose a new cycle.
  3. Press “Start/Pause.” You have now reset your Maytag washer.
You might be interested:  Often asked: What Does Error Code 10016 Mean When System Crashes?

How do I clear the error code on my Maytag washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

How do I fix error code F21 on Maytag?

Possible Causes and Action:

  1. Turn the washer ON to verify the pump operates.
  2. Check the drain hose and make sure it is not plugged or kinked.
  3. Unplug the washer or disconnect power.
  4. Check the electrical connections at the pump and make sure the pump is running.
  5. Check the drain pump filter for foreign objects.

What does Error 20 mean on a washing machine?

Issue: Washer dryer displays error message E20 or C2, emits 2 beeps or 2 flashes. It indicates pumping problems. Washer dryer does not drain. The appliance makes an unusual noise because of the blockage of the drain pump.

What does it mean when a washer says F21?

If your Whirlpool washer is showing an F21 error code, this means that your washer is unable to drain properly. This can be caused by a clogged pipe, a faulty drain pump, or something simpler.

Why does my washing machine keep saying error?

Common appliance codes could be related to a problem with the door, a water heating sensor, a software or circuit board fault, a motor or pump fault plus much more. Simple things that could have an error code could be the door being left ajar on the machine or the detergent drawer not in situ properly.

You might be interested:  How To Fix Error Code 45?

Why is my Maytag washer stuck on sensing?

If your Maytag washer’s sensing light is stuck and will not move to the appropriate cycles, this is usually caused by a stuck or keypad. The keypad can occasionally become jammed or, if you have recently replaced a part on the washer, you may have forgotten to recycle the codes, which can lead to a stuck sensor light.

Why did my Maytag washer stop working?

Some of the most common faults that will make your washer stop mid cycle include thermostat failure, problems filling up with water for the rinse cycle, or even pump problems that prevent your washer from draining. One thing that you can check yourself is the lid switch.

How do I reset my washing machine?

To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.

How do you clear a F28 code on a Maytag washer?

An F28 error code is a common problem that means there is a communication problem with the central control unit. This problem is generally solved by essentially rebooting the control unit. Rebooting the control unit is accomplished in less than 10 minutes, even by the novice.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top