Readers ask: How To Correct An F6 Error Code On Whirlpool Model Gh4155xpt-o Microwave?

The F6 error indicates a relay on the control has failed. You can try to unplug the microwave for a few minutes and then try it again. If the error repeats then the control will have to be replaced.

What does F6 mean on microwave?

The F6 error code is telling you a relay has stuck on the control board (called a microcomputer in the parts diagram).

How do you reset a whirlpool smart microwave?

Press the “Off/Clear’ button to cancel anything on the display, and reset the microwave. This is a soft reset and will simply get you out of any program you have started. Press it when the cooking complete reminder appears on the display, for example, and the “Your Food is Ready” message will disappear.

How do I turn off the control lock on my Whirlpool microwave?

To Turn the Control Lock Feature On or Off:

  1. Make sure the microwave oven and timer are off.
  2. Press and hold the CANCEL keypad for 3 seconds.
  3. Two (2) tones will sound and “LOC” or a padlock icon will be displayed (indicating the control is LOCKED).
  4. Repeat to unlock. Again, two (2) tones will sound.
You might be interested:  Question: What Is Error Code 267 In Roblox?

Does Whirlpool microwave?

Enjoy delicious, healthy food with microwaves from Whirlpool brand. Whether you opt for the on-counter convenience of our standard models or the space-saving design of our wall oven microwaves or microwave-hood combinations, you’ll be able to reheat, defrost or prepare food with ease.

Why does my microwave say se?

When the SE error code appears on a Samsung Microwave it indicates that your unit has a key that’s stuck on the control pad or ribbon cable connection is dirty or the electronic control board has failed.

How do I reset my Whirlpool oven control board?

Reset power to the product:

  1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
  2. Power unit up by turning on the circuit breaker(s).
  3. Start a bake cycle.
  4. Monitor the oven for one (1) minute to ensure the error code does not display again.
  5. Verify oven operation.

Is there a reset button on ovens?

2- Do ovens have a reset button? Your oven might also have a circuit breaker with a reset button on the control console or on top of the oven that needs to be reset. If you are still confounded, pull the oven away from the wall.

How do you clear the error code on a Whirlpool oven?

Plug the oven power cord back in or turn ON circuit breaker. Press CANCEL on the display. If fault code comes back after 1 minute then replace the keypad. If F2 E0 persists then replace the electronic oven control.

What causes a microwave to suddenly stop working?

The most common cause for a microwave oven not working at all is a blown main fuse. The microwave main fuse will cut the flow of electricity if too much current passes through it. There can also be thermal fuses, cavity fuses, and thermoprotectors which will interrupt the electrical flow if the microwave overheats.

You might be interested:  What Does Error Code E24 Mean On A Bosch Dishwasher?

Can a power cut damage my microwave?

The power surge that happens when the power comes back on can damage the magnetron tube in the microwave. When there is a power outage, it is important to follow the proper procedure for protecting your microwave. The power surge that happens when the power comes back on can damage the magnetron tube in the microwave.

How do I unlock a Whirlpool microwave?

To Lock/Unlock Control: The microwave oven must be off. Touch and hold CANCEL/OFF for 3 seconds until the tone sounds and “Loc” appears in the display. The display will return to time of day mode (if Clock is set) after 3 seconds. Repeat to unlock.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top