Readers ask: How To Reset Error Code On Bizhub C552?

How to: Resetting Konica Minolta errors

  1. Step 1: Turn OFF the Main Power Switch.
  2. Step 2: Turn Main Power Switch ON while pressing the Utility/Counter key.
  3. Step 3: Touch [Trouble Reset].
  4. Step 4: Check to make sure that [OK] is displayed and the it has been reset.

How do you reset a Konica Minolta Bizhub?

Follow the procedure on Controller Administrator Setting to display the [Controller Administrator Setting Menu] screen. Press [System Setting] and [Default Machine Setting] in sequence. Press [Start]. Pressing [Start] resets all settings to factory default.

How do I reset my Konica Minolta password?

Reset Administrator Settings Password:

  1. Touch counter then press Stop > 00 > Stop > 01.
  2. Enter CE password 92729272.
  3. Touch keypad then press Stop > 222 > 00 (Security Service Mode)
  4. Touch Administrator Password.
  5. Enter the default Admin password 12345678.
  6. Confirm Admin passwor.

How do I clear my Konica Minolta memory?

Press [System Setting] on the [Administrator Setting Menu] screen, and then press [Restrict User Access], [Lock/Delete Mode Memory], and [Scan Mode Memory] in sequence.

You might be interested:  How To Fix Directv Error Code 771?

How do you clear the drum error in bizhub 20?

FAQs & Troubleshooting

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press Clear/Back on the control panel.
  4. Press 1 to reset the drum counter.
  5. When the LCD shows Accepted, close the front cover.

How do I reset my bizhub c360i?

Trouble Reset Konica C220/C280/C360

  1. Turn Power Off inside front door Press and Hold Down Utility/Counter Button & Keep Held Down while turning power back on until a black dot appears in the top right of the control panel display then release.
  2. When booted to Trouble Reset Screen press Trouble Reset.

How do I reset my Bizhub C3350?

Re: C3350

  1. Turn OFF the main power switch.
  2. Turn main power switch ON while pressing the Power key.
  3. If a trouble code appears, press the “Menu” key on the control panel.
  4. Touch the password input area and, using the keyboard on the screen, type the CE password.
  5. Touch [OK].
  6. Touch [Trouble Reset].

How do I login as admin on Konica Minolta?

Log in to the Konica Minolta Bizhub firmware. In the top left-hand corner of the screen, look for the administrator login form. Type “12345678” (without quotes) into the form field under the words “Administrator Password” and then click the “Log in” button to log in to the Konica Minolta Bizhub.

What does error deletion mean on a printer?

The Konica Minolta deletion error usually occurs when the user is trying to print or scan a document. The most common causes of the error message “ Deleted Due To Error ” are either an incorrect configuration of the system settings, or faulty entries in the Windows registry.

You might be interested:  Quick Answer: What Does Error Code 2048 Mean?

How do you reset the drum counter on a Konica Minolta?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press Clear/Back on the control panel.
  4. Press 1 to reset the drum counter.

How do I check my Konica Minolta print history?

Konica Minolta MFD public web interface opens. Click Job tab. Click Job History tab. Job History will show last 100 jobs, including Print, Fax TX, Scan TX jobs.

How do you reset the drum on a Brother HL 5340d?

To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. Close the front cover. Make sure that the Drum LED is now off.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top