Readers ask: What Does Error Code B200 Mean On A Canon Printer?

How do I fix a B200 error on my Canon printer?

How to Fix the Canon B200 Error

  1. Reset the printer.
  2. Remove any obstructions.
  3. Clean the printer head.
  4. Manually clean the print head.
  5. Remove old ink.
  6. Re-install the printer drivers.
  7. Try a new ink cartridge.
  8. If none of the above methods work, then the B200 error is probably accurate.

Why the Canon printer error code B200 occurs?

In most cases, getting the error B200 indicates that the printhead of your Canon printer is dead. Apart from that, defective ink cartridges and a corrupt printer driver can also trigger this problem.

How do I clear the error code on my Canon printer?

Reset the Canon printer

  1. Switch on the printer.
  2. Press and hold the Stop/reset button.
  3. Press the button that you use to make a color copy and hold it down.
  4. Wait 5 seconds.
  5. The printer now reboots and sets itself up.
  6. Does the printer indicate that the device needs to be calibrated?
  7. You’ve reset your printer.

How do I reset my Canon mg5520 printer?

Select Setup on the HOME screen. Select Device settings, then press the OK button. The Device settings screen is displayed. button to select Reset settings, then press the OK button.

You might be interested:  Readers ask: How To Go Into Bios When U Get Recovery Error Code 0xc000000e?

How do you clear a Canon ink absorber?

Press and hold the “Power” button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the “Power” button again. This resets the printer’s internal memory and overrides the “Ink Absorber Full” error code.

How do I reset my Canon printer?


  1. Check if the Pixma printer is turned on.
  2. Go to the Menu option and select Setup.
  3. Make use of the navigation arrows to highlight the option you want.
  4. Next, tap the Device Settings option and press the OK button.
  5. Choose Reset Settings.

What does B mean on a Canon printer?

(A) Alarm lamp. (B) Color Ink lamp.

How do I fix a Canon printer error state?

How to fix Canon printer in error state Windows 10

  1. Step 1: Fix Port issues. Windows 10 has some problems with the ports when it comes to printers.
  2. Step 2: Reinstall the driver. Firstly, open the Device Manager by right-clicking on the Start menu.
  3. Step 3: Manually update the driver.

How do you manually clean a Canon printer head?

How to clean the Canon printhead

  1. Dampen the lint-free cloth with hot water and gently wipe away an excess ink on the printhead nozzle.
  2. Place the printhead in the container with the submerged paper towels.
  3. Let the printhead soak for about ten minutes.
  4. Reinstall the printhead back into the printer.

How do I reset my canon mx860 printer?

Instructions to change the machine back to its default settings.

  1. Press the button.
  2. Press the or button to select Settings, then press the OK button.
  3. Use the button to select [Device settings], then press the button.
  4. Use the button to select [Reset setting], then press the button.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top