Readers ask: What Is Error Code F8 E3 On My Maytag Washer?

– The error code F8 E3 means there is too much water in the machine which also means the water will not drain out. – The F8 E3 error code will display when there is excess water in the tub. – When the washer repeats the steps, it will cancel the washing cycle and will drain out all of the water from the tub.

How do I fix E3 error on my washing machine?

How To Fix 3E Samsung Washer Error Code:

  1. Unplug The Washing Machine: Unplug the washer for 2-3 minutes.
  2. Check Wire Connections On Drive Motor: One fairly common issue that causes the 3E error code is connection problems.
  3. Check Wire Connections On Control Board:
  4. Check Hall Sensor:

What does F8 mean on Maytag washer?

If the washer has an F8 E1, LF, or LO FL error, the door will be locked, and the control will be unresponsive. Press the power button, and the washer will start a drain routine which takes approximately 8 to 10 minutes, during which time the pump will run continuously.

You might be interested:  Often asked: What Is Error Code P0606?

What does E3 mean on a Maytag washer?

The E3 error means that the control board is detecting current going to the motor, but the motor won’t turn properly. If the error code comes up all the time as soon as you press the power on button, then it means your control board is bad and reading incorrectly. Score 3.

How do I fix F8 error on washing machine?

If F8 E1 or LF (too long to fill) appears in display, it means the washer is taking too long to fill. It’s possible the drain hose extends more than 4.5″ (114 mm) into standpipe. Check plumbing for correct drain hose installation. Use drain hose form and attach securely to drainpipe or tub.

What does f8 E3 mean on a Whirlpool washer?

The F8E3 Error Code indicates that there may be an internal overflow from the water inlet valve. Verify that the drain hose and drain pump filter are not plugged.

What is E3 error?

The E1 or E2 error code is an Auto-Stop Protection Error, indicating an issue detected by a sensor. The E3 error code displays when an Abnormal Operation Protection Error has occurred, and activates to protect the unit from damage. This error code will require service.

How do I fix error F8 E1?

Make sure the drain hose is not kinked or clogged. Straighten the hose for adequate water flow. Remove any blockage from the drainpipe of a utility sink. If code is still displayed:

  1. Unplug the washer or disconnect the power for one minute.
  2. Plugin the washer or reconnect the power.
  3. Re-select the cycle and press Start.
You might be interested:  Quick Answer: Microsoft Windows 10 File Error Code 0 What Does It Mean?

How do I clear the error code on my Maytag washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

How do I reset my Maytag washer?

If an error message causes your Maytag washer to not run properly, reset the washer to clear the error message. How to Reset a Maytag Washer

  1. Press the “Power/Cancel” button.
  2. Push the appropriate button to choose a new cycle.
  3. Press “Start/Pause.” You have now reset your Maytag washer.

Why is my washer saying E3 F5?

The F5 E3 alert indicates there is issue with the lid lock. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.

What does E3 mean on Hisense washing machine?

E3. Water cannot be drained 1. Drain hose is placed too high.

What does F8 mean on a washing machine?

If the washer has an F8 E1 error or LO FL error, the door may be locked, and the control may be unresponsive. Press the power button, and the washer will start a drain routine, which takes approximately 8 to 10 minutes, during which time the pump will run continuously.

You might be interested:  Quick Answer: Frigidaire Affinity Washer Error Code E11 Why Can't I Do Reset?

What does F8 E6 mean on a Whirlpool washer?

A F8 E6 alert indicates the washer lid was left open. Close the lid to clear the display. Depending on your model, you may have to touch the power button. If the lid is left open for more than 10 minutes, the cycle will reset and water in the washer will drain. If washer has drained, start cycle over.

What does E3 mean on a Whirlpool dryer?

The Whirlpool Duet Dryer E3 Error means either the logic chip in the main control has failed or the user interface or main control board was replaced with the wrong part and is not compatible with that model.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top