What Does The Error Code B200 On A Pixma Mg5320 Mean?

How do I fix the B200 error on my Canon printer?

How to Fix the Canon B200 Error

  1. Reset the printer.
  2. Remove any obstructions.
  3. Clean the printer head.
  4. Manually clean the print head.
  5. Remove old ink.
  6. Re-install the printer drivers.
  7. Try a new ink cartridge.
  8. If none of the above methods work, then the B200 error is probably accurate.

What causes a B200 error on Canon printer?

The dreaded B200 Error on your Canon Printer usually indicates that the print head has died! Next method to try is to reload the printers drivers as the B200 error code can be caused in some cases by a corrupted Driver.

How do I reset my Canon printer?

HOW DO I RESET MY CANON PIXMA PRINTER TO FACTORY SETTINGS?

  1. Check if the Pixma printer is turned on.
  2. Go to the Menu option and select Setup.
  3. Make use of the navigation arrows to highlight the option you want.
  4. Next, tap the Device Settings option and press the OK button.
  5. Choose Reset Settings.

What is a printhead in a Canon printer?

A printhead is the device in an inkjet printer which sprays droplets of ink onto a sheet of paper. Find the answers to your Canon Printhead questions. The print head delivers very small drops of ink onto the paper. The ink from the cartridge is transported via small tubes.

You might be interested:  Often asked: What Does Error Code 1604 Mean In Java?

How do I get my Canon printer out of error state?

How do I get my printer out of an error state?

  1. Make ports settings changes. Press the Windows logo key + R on your keyboard > type devmgmt.msc and hit Enter to open the Device Manager.
  2. Make sure that your printer is Online.
  3. Reinstall the printer driver.
  4. Set the Print Spooler service to automatic.
  5. Update Windows.

Why does my Canon printer keep saying error?

If trying to print produces an error message on your computer, take note of it. Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you’re trying to print. The ink for your printer might be running low and may need to be replaced.

How do you fix Canon printer not responding?

Fixes to try

  1. Do some basic troubleshooting.
  2. Run the printer troubleshooter.
  3. Restart the Print Spooler service.
  4. Configure the correct printer port for your printer.
  5. Update your printer driver.

How do I fix canon 5011 error?

Fix: Canon Printer Error 5011

  1. Unplug your printer and let it stay off for 3 minutes, then power it back on and test. If it doesn’t work, then turn it off again.
  2. Lift the lid from the printer, including the scanner. With the lid open, turn the printer back on.
  3. Then close the lid and see if that fixes the issue.

What does the orange flashing light mean on my Canon Printer?

Meaning: the printer is out of paper / No paper. Solution: Reload paper in the rear tray and press the Resume / Cancel button. Meaning: the paper exit tray is closed / Paper jam.

You might be interested:  Quick Answer: How To Clear Lc Error Code On Samsung Dishwasher?

How do I run a diagnostic on my Canon Printer?

Navigate to your computer’s “Control Panel” and click on the “Printers and Faxes” option. Click on the “Add A Printer” button if your Canon printer isn’t showing up in the list. Follow the on-screen instructions so that your computer will run a test to try to detect the printer.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top