What Is An E 9 Error Code On Accu-chek?

“E-9” in the display means the battery is almost out of power. Change the battery now. If the message reappears after the battery has been replaced, reset the meter. To reset the meter, remove the battery, press any meter button, then reinsert the battery.

How do I remove e1 error from Accu-Chek?

“E-1” in the display means the test strip may be damaged or the code key is incorrect. Remove and reinsert the test strip. If the message reappears, turn off the meter and make sure the code key is properly inserted. If the message reappears, please contact Accu-Chek Customer Care.

How do I fix error e5 on Accu-Chek?

“E-5” in the display means the code key is incorrect or your test strips have expired. Make sure the time and date in the meter are correct. If the problem persists, please contact Accu-Chek Customer Care.

What does E 2 mean on a blood sugar monitor?

“E-2” in the display means the code key is incorrect. Turn the meter off and make sure the code key is properly inserted. If this does not fix the problem, please contact Accu-Chek Customer Care.

You might be interested:  FAQ: How To Fix Error Code 0xc000000f?

How do you reset a glucose meter?

Press and hold the M (Memory) button for 7 seconds to restore the glucometer’s factory settings. Restoring factory settings: Restores the date by default (01/01/2017). Remember to reconnect the glucometer before taking new offline measurements.

Why does my glucose meter say error?

Error codes may typically appear for reasons including: Blood test sample smeared or not large enough. Test strip incorrectly inserted. Wrong test strip used.

What is E 3 error in Accu Chek Active?

“E-3” in the display means your blood glucose may be extremely high or a meter or a test strip error has occurred. The following instructions should help you understand what action to take: If your test result matches how you feel, contact your healthcare professional immediately.

What does E 9 mean on my Accu Chek Aviva?

“E-9” in the display means the battery is almost out of power. Change the battery now. If the message reappears after the battery has been replaced, reset the meter. To reset the meter, remove the battery, press any meter button, then reinsert the battery.

What is code 333 in Accu Chek?

Why does the meter still say code “333” when it is turned on? This is a software function which was programmed. It is not possible to change this software function – that’s why the meter still says code 333 when it is turned on. Do the old Accu-Chek Active meters still need an activation chip?

What does Error 2 mean on a one touch?

Error 2. What it means: Error message could be caused either by a used test strip or a problem with the meter or test strip. What to do: Repeat the test with a new test strip.

You might be interested:  Often asked: How To Fix Adobe Pdf Error Code 110?

What is M and S in Accu Chek Active?

The beep symbol appears together with (on) on the display. At the end of making settings, the meter displays the current settings. Press the M and S buttons briefly at the same time to turn the meter off. Press the M button briefly to turn the beep on or off.

How do you bring blood sugar down quickly?

When your blood sugar level gets too high — known as hyperglycemia or high blood glucose — the quickest way to reduce it is to take fast-acting insulin. Exercising is another fast, effective way to lower blood sugar. In some cases, you should go to the hospital instead of handling it at home.

What should your blood sugar be?

A normal blood glucose level for adults, without diabetes, who haven’t eaten for at least eight hours (fasting) is less than 100 mg/dL. A normal blood glucose level for adults, without diabetes, two hours after eating is 90 to 110 mg/dL.

Does true Metrix need to be calibrated?

McKesson TRUE METRIX® is an in vitro (outside body) quantitative system that is used for self-testing of human whole blood only. Alternative site (forearm) testing should not be used to calibrate continuous glucose monitors (CGMs).

How do you reset a one touch?

Master reset from settings menu

  1. Back up data on the internal memory.
  2. From the Home screen, tap the Recent Apps key to bring up the Menu.
  3. Tap Settings.
  4. Scroll down to ‘PERSONAL,’ then tap Backup and reset.
  5. Scroll down to ‘Personal data,’ then tap Factory data reset.
  6. Tap Reset phone.
  7. Tap Erase everything.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top