What Is Error Code 0x97 On An Epson Printer?

The Epson printer error code 0x97 is a hardware malfunction error, which means that your printer is essentially non-operational. Epson will replace your printer if they can’t help you fix it. It would be best to take advantage of your warranty before anything else.

How do I fix Epson error 0x97?

How can I fix Epson printer error 0x97?

  1. Use Microsoft’s Printer Troubleshooter.
  2. Unplug and Plug-in.
  3. Clean the printer using wet tissue.
  4. Update your drivers.
  5. Contact Hardware Specialist.

What is Epson error code 0x97?

Error Code 0x97 is a kind of warning that occurs when you face any kind of internal hardware issue in your Epson printer. This error is caused due to multiple reasons such as motherboard failure or any other internal component failure.

How do I fix Epson WF 3640 error code 0x97?

To do this fix, you must cancel all the print jobs first and remove any paper jams. It’s actually pretty simple and for other it worked. After getting rid of papers, unplug all cables from the printer and everything connected to it. Everything attached to it – USB, cable wires, power cords and ink cartridges.

You might be interested:  Quick Answer: How To Fix Error Code 2755?

What are the problems of Epson printer?

Epson Printing Issues Some common printing issues include banding, incorrect colors appearing, blurry prints, grainy prints, or faded prints.

How do I fix error code 0X97?

Troubleshooting Methods for fix Error Code 0x97:

  1. Disconnect Everything from the Printer.
  2. Reset your Printer.
  3. Clean the Print Head.
  4. Install and update your printer’s driver.

How do I reset my Epson printer?

To Factory Reset an Epson printer:

  1. Turn off the printer.
  2. Press and hold the reset button on the back of the printer (normally located to the right of the ethernet port).
  3. Turn on the printer while holding the reset button.
  4. Wait until a message prints indicating that the printer is resetting.

How do I fix Epson printer error?

How to Fix Epson Printer Error State

  1. Step 1: Check all your connections. Check the hardware for any loose connections.
  2. Step 2: Reinstall/Update the Driver.
  3. Step 3: Our very own – Windows Troubleshooter.
  4. Step 4: If nothing seems to solve the error.
  5. Related Printer Error:

How do I update my Epson scanner?

Open Epson Software Updater from the Applications > Epson Software folder. If you do not have the Epson Software Updater utility, you can download it here. Select Epson Firmware Update by checking the box next to it, then click the Install button. Select Agree to continue.

Why is my Epson printer not printing when the ink is full?

Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Print a nozzle check pattern to see if any of the nozzles are clogged. Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct.

You might be interested:  Question: What Is Error Code 80070570?

How do I reset my Epson WF 3640?

Resetting Control Panel Defaults

  1. Press the home button, if necessary.
  2. Select Setup.
  3. Scroll down and select System Administration. Enter the administrator password, if necessary.
  4. Scroll down and select Restore Default Settings. You see this screen:
  5. Select one of these options:
  6. Select Yes to reset the selected settings.

How do I update my Epson WF 3640 firmware?

Do the following:

  1. Go to the Downloads tab.
  2. Click Firmware Update under Firmware, then click Download.
  3. Follow the on-screen prompts to download the firmware.
  4. Do one of the following:
  5. When the following screen appears, connect the USB cable directly from the printer to the computer, then click Next.

Why does my Epson printer stop in the middle of printing?

Head cleaning, ink charging, or ink drying is in progress Check to see if the Pause light is flashing. If so, the printer is in the process of head cleaning, ink charging, or ink drying. During head cleaning and ink charging, WAIT is displayed on the LCD panel.

How do I run a diagnostic on my Epson printer?

Hold down the paper button and press the power button to turn on the printer. Then, release only the power button. When the printer starts the operation check, release the paper button.

Why is my printer not printing black when ink is full?

Check if the vents of the cartridges are clogged. Try using a different ink cartridge to determine if your printer is able to recognize cartridges. If your printer used to work with an old cartridge, try installing that old cartridge again and see if your printer produces any sort of output–any shade of gray will do.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top